Categories

False alarms and system glitches can be aggravating, and more importantly, could prevent your security system from doing its job effectively. Fortunately, most troubles, from dead batteries to false alarms, are easy to remedy. Take a look at our suggestions for troubleshooting your home alarm system in Sugarland. We’ll help you keep your household safe and your system running smoothly.

Test Your Home Security System In Sugarland

One sensible way to troubleshoot your property’s security is to test it yourself! Newer systems have a test mode so you don’t by accident prompt an emergency response. Once in test mode, do the following:

• Activate your system as you typically would when you head out.
• Open a door or window that uses a contact sensor, or try to set off another sensor. Shut the window or door once you’re done so it doesn’t trip the alarm when you leave test mode.
• Allow the alarm to sound for 60 seconds to ensure communications with the security provider and to produce an entry in the alarm system log.
• Continue testing equipment as you wish
• Review the systems’s activity log to validate functionality.

Rest assured, monitoring professionals can see that your alarm system is undergoing a test. Just be sure to turn test mode off when done. It’s a good idea to test monthly or whenever you adjust your home’s internet or phone service.

Inspect The Position And Condition Of Motion Detectors

Although an essential part of your alarm system, motion sensors are prone to false alarms. Prevent them with a few simple troubleshooting steps.

• Conduct a physical check. Are there items that could move within the sensor’s detection range, like a curtain blown in a breeze?
• Is the sensor clean? Cobwebs, dirt, and debris can result in poor performance. Ensure the sensor is clean.
• Does the motion detector come with pet immunity you can turn on? Some can be set to ignore pets weighing as much as 100 pounds.
• When was the battery changed? A low battery might impact performance or lead to false alarms.
• Is the sensor pointing toward a source of heat? Excessive heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries On Hand And Look Out For Low Battery Notifications

One helpful benefit of modern home security systems is that they’ll let you know when batteries are dying. If your system uses a app or control panel, you’ll often see messages there. Depending on the alarm, you could hear an occasional beep when batteries are low. 

Motion sensors, contact sensors, smoke detectors, and other wireless devices have batteries that should be replaced every year or two. It’s best to keep batteries on hand and establish a replacement schedule. Many systems also come with a backup battery for the primary control panel. This backup battery keeps your system operating if your power goes out and should charge back up once power is back online. If it doesn’t, you will need to replace it.

Troubleshooting Is Easy With ADT Home Security In Sugarland 

As the foremost name in home security, ADT creates systems that offer unrivaled protection and functionality. Switching to test mode is simple through MyADT.com or the ADT+ app, and you’ll always get alerts when a sensor battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system ideal for your Sugarland home and family. Dial (281) 502-5306 or submit our form today!